Germany - Wheel axles and tyres and other parts for locomotives or rolling stock

Description

Delivery of wheel tyres, V-rings and fastening material for the low-floor types 6N1 (6NGTWDE) and 6N2 (Tramlink Rostock) Framework agreement, establishment of a consignment warehouse The wheel tyres must comply with the respective regulations during the entire production process until delivery. Due to the special steels used, the UIC code 810-1V must be followed.
Provision of the wheel tires as well as the V-rings and fastening material in a consignment warehouse with a minimum term of 2 years, unilateral option of contract extension by RSAG for another 2 years.The wheel tires must comply with the respective regulations during the entire production process until delivery. Due to the special steels used, the UIC code 810-1V must be followed.technical parameters 6N1 (6NGTWDE)- wheel design SAB V60- wheel tire material special steel V101;- tensile strength 920 - 1.080 N/mm2;- hardness of wheel tyre 263 - 320 (HB);- wheel tyre profile according to attached drawing (see appendix);- tread circle diameter 590 mm;- wheel width 105 mm;- V-ring fully synthetic 80 Shore A, inner diameter 410 mm;- wheel nut M14;- wheel stud bolt M14x100-10.9, thread forming in non-cutting process, thread length 20 mm on both sides.Technical parameters 6N2 (Tramlink Rostock) - wheel type SAB V60 (55o)- wheel tyre material special steel Saxonia S5T;- tensile strength 1 000 - 1 120 N/mm2;- hardness wheel tyre 320 - 355 (HB);- wheel tyre profile according to attached drawing (see attachment);- tread circle diameter 600 mm;- wheel width 105 mm;- V-ring fully synthetic 80 Shore A, inner diameter 420 mm;- wheel nut M14;- wheel stud bolt M14x95-10.9, thread forming in non-cutting process, thread length 20 mm on both sides;- Manufacturer's information on the wheel tyres supplied;- Inspection certificate according to DIN EN 10204/3.1 B- Product analysis;- Type of melting of the raw material;- Position of the samples;- Results of the mechanical testing;- Documentation of the results of the - Hardness test;- Dimensional check;- Chemical composition;- Heat treatment.

Opportunity closing date

15 June 2020

Value of contract

to be confirmed