United States - Restrictor, Fluid Flow

Description

Added: Jun 17, 2019 10:14 am

Item Name: Restrictor, Fluid Flow (see Procurement Item Description below)
NSN: 4730-01-190-3154
Destination Information: Various DLA Stocking Locations
AMC/AMSC Code: 1B
NAICS Code: 332996; the small business size standard is 500 employees.

This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). FOB will be at Origin and Inspection/Acceptance will be at Destination. The proposed procurement will be a Long Term Contract (LTC), and will be for a total of five (5) years, consisting of three (3) Base Years and two (2) Option Years. The Option Years may be exercised at the discretion of the Government. The Government requested delivery for this item is 150 days.
Based upon market research, the Government is using the policies contained in FAR Part 15 - Contracting by Negotiation - in its solicitation for the described supplies or services.
This will be solicited as an unrestricted acquisition, utilizing other than full & open competition. The solicitation will be available at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about its estimated issue date of July 15, 2017. Specifications, plans or drawings are not available.
RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified on Page 1 of Standard Form 33. All responsible sources may submit an offer/proposal, which shall be considered.
While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors, as described in the solicitation.
One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer.

STO CS001
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.
DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data. In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.
DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses

Procurement Item Description (PID):
-
*** LTC PID Packaging Consolidated Text ***
-
PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION
AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.
CLIN 0001: NSN: 4730-01-190-3154
RESTRICTOR,FLUID FLOW.

REFERENCE NUMBER:RP001
REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001
REFERENCE NUMBER:RQ011
REFERENCE NUMBER:CS001
REFERENCE NUMBER:CS187
REFERENCE NUMBER:CS120
CRITICAL APPLICATION ITEM
Lee Company, The 92555 P/N JEBX0501700A
IAW BASIC DRAWING NR 78286 70450-01800
REVISION NR AY DTD 07/24/2008
PART PIECE NUMBER: 70450-01800-102
IAW REFERENCE DRAWING NR 78286 70450-01800
REVISION NR C DTD 10/25/2004
PART PIECE NUMBER:

PREP FOR DELIVERY
LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS
PKGING DATA-QUP:001
SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

************************************************************************************
GLOSSARY
************************************************************************************
PACKAGING TEXT
THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
Markings Paragraph
When ASTM D3951, Commercial Packaging is specified, the following apply:
•,,All Section "D" Packaging and Marking Clauses take precedence over
ASTM D3951.
•,,In addition to requirements in MIL-STD-129, when Commercial Packaging
is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack.
•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified
in the contract take precedence over QUP in ASTM D3951.
ITEM DESCRIPTION TEXT
REFERENCE NUMBER RP001
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
REFERENCE NUMBER RD002
THIS NATIONAL STOCK NUMBER AND/OR ASSOCIATED DATA HAS
BEEN DETERMINED TO CONTAIN, UTILIZE, OR GENERATE
COVERED DEFENSE INFORMATION (CDI). CDI IS UNCLASSIFIED
CONTROLLED TECHNICAL INFORMATION OR OTHER INFORMATION<(>,<)>
AS DESCRIBED IN THE CONTROLLED UNCLASSIFIED INFORMATION
(CUI) REGISTRY THAT REQUIRES SAFEGUARDING PURSUANT TO
DFARS 252.204-7012.
REFERENCE NUMBER RA001
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
REFERENCE NUMBER RQ011
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
REFERENCE NUMBER CS001
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms Regulations
(ITAR) or the Export Administration Regulations (EAR) and cannot be
exported without the authorization of either the Department of State or
the Department of Commerce prior to export. Export includes disclosure
of technical data to foreign nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees or U.S. companies and their foreign subsidiaries.
DLA has enhanced its Joint Certification Program (JCP) registration and
validation procedures. Selected National Stock Numbers (NSNs) will
require additional permissions to access the associated technical data.
In the event a vendor cannot access the technical data for a NSN in DLA
cFolders, the vendor must submit a onetime request to
jcpvalidation@dla.mil for technical data access consideration. If a
vendor has inquiries after having submitted required information to the
JCP office, these inquiries are to be directed to
DLAJ344DataCustodian@dla.mil.
DLA processes the vendor's technical data request on a first come, first
served basis. Failure to comply timely with required information may
result in lack of consideration for DLA solicitations. It is vitally
important that vendors provide correct company official name(s) and
contact information in all correspondence. DLA will work diligently on
validating vendor requests. Vendors will be notified within 3 business
days of when their requests were approved. However, DLA cannot
guarantee that it can complete all validation requests by the due date
for any solicitation responses.
REFERENCE NUMBER CS187
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER CS120
NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED
DRAWING AND AS OF THE DATE OF THIS SOLICITATION
ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED
PART NUMBERS ARE PROVIDED, THE ITEMS
FURNISHED MUST MEET THE REQUIREMENTS OF THE
CITED DRAWING. OFFERORS WHO ARE INTERESTED IN
QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
DRAWING.
ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME.

Opportunity closing date

03 July 2019

Value of contract

to be confirmed