Poland - Repair and maintenance services of aircraft and other equipment

Description

Repair of the engine after 12 years, type - Lycoming IO540-K1B5, no. fab. The subject-matter of the contract must be performed by a maintenance organisation holding a certificate issued by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate for this type of work.3 After each overhaul, the maintenance organisation will make appropriate entries in the aircraft component maintenance documentation proving that the service has been performed and issue a FORM 1 EASA Form or equivalent document for the work performed, pursuant to paragraph (a). M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first. Repair of the engine after 12 years, type - Lycoming IO540-K1B5, no. fab. L-26338-48A2. The subject matter of the contract must be performed by a maintenance organisation certified by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate for this type of work.3 After each overhaul, the maintenance organisation shall make appropriate entries in the aircraft component maintenance documentation proving that the service has been performed and shall issue an EASA Form 1 or equivalent document for the work performed, pursuant to paragraph (a). M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first. Repair of the control disc after 1 500 h, type 50.22.000.00.02, serial No. 113014.2 The subject matter of the contract must be carried out by a maintenance organisation holding a certificate issued by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate to carry out this type of work.3 After each overhaul, the maintenance organisation will make appropriate entries in the aircraft component maintenance documentation proving that the service has been carried out and issue a FORM 1 EASA Form or an equivalent document for the work carried out, pursuant to point A.3. M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first. Repair of the propeller after 6 years, type HC-C3YR-1RF with feature no. DY3980A.2 The subject matter of the contract must be performed by a maintenance organisation certified by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate for this type of work.3 After each overhaul, the maintenance organisation will make appropriate entries in the aircraft component maintenance documentation proving that the service has been performed and issue the EASA FORM 1 Form or an equivalent document for the work performed, pursuant to paragraph (a). M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first. 1. repair of the shock absorber after 1 350 h, type UZ 116000 with Factory No. The subject-matter of the contract must be performed by a maintenance organisation holding a certificate issued by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate for this type of work.3 After each overhaul, the maintenance organisation will make appropriate entries in the aircraft component maintenance documentation proving that the service has been performed and issue a FORM 1 EASA Form or an equivalent document for the work performed, pursuant to paragraph (a). M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first. Overhaul of 3 hydraulic amplifiers after 1 500 h, type WH-4 with serial numbers: C05030001, C05030002, C050300032. The subject matter of the contract must be carried out by a maintenance organisation holding a certificate issued by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate for this type of work.3 After each overhaul, the maintenance organisation will make appropriate entries in the aircraft component maintenance documentation proving that the service has been performed and issue the EASA FORM 1 Form or an equivalent document for the work carried out, pursuant to paragraph (a). M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first. Repair of hydraulic block after 1 500 h type BH-2 with factory no. C05040004.2 The subject matter of the contract must be performed by a maintenance organisation holding a certificate issued by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate for this type of work.3 After each overhaul, the maintenance organisation will make appropriate entries in the aircraft component maintenance documentation proving that the service has been performed and will issue the EASA FORM 1 Form or an equivalent document for the work performed, pursuant to paragraph (a). M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first. Repair of the fuel pump after 9 years/1 000 h, type ECN-75C, Factory No. C04030012. The subject matter of the contract must be carried out by a maintenance organisation holding a certificate issued by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate for this type of work.3 After each overhaul, the maintenance organisation will make appropriate entries in the aircraft component maintenance documentation proving that the service has been performed and issue the EASA FORM 1 Form or an equivalent document for the work carried out, pursuant to paragraph (a). M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first. Repair of the fuel pump after 9 years/1 000 h, type ECN-75C, Factory No. C04030022. The subject matter of the contract must be carried out by a maintenance organisation holding a certificate issued by the competent Aviation Authority (ULC or EASA approved) with a scope of approval appropriate for this type of work.3 After each overhaul, the maintenance organisation will make appropriate entries in the aircraft component maintenance documentation proving that the service has been performed and issue the EASA FORM 1 Form or an equivalent document for the work carried out, pursuant to paragraph (a). M.A.501 of Annex I Part M to Commission Regulation (EU) No 1321/2014 of 26.11.2014. (as amended) on the continuing airworthiness of aircraft and aeronautical products, parts and appliances, and on approvals granted to organisations and personnel involved in such tasks.4 The economic operator shall provide the awarding authority with a guarantee and warranty for defects in the subject matter of the contract of a minimum of 12 months or a minimum of 250 working hours, whichever comes first.

Opportunity closing date

09 April 2019

Value of contract

to be confirmed