Germany - Front-end loader

Description

Delivery of 5 wheel loaders on a rental basis including full service package.
1. scope of delivery: delivery (delivery/delivery), commissioning and instruction of the client as well as full service during the entire term; installation of a separate telematics system by the client, data and diagnostic access via Can-Bus;2. operating conditions: Operating time 24/7 (shift operation - high availability required) - operation also in halls with highly dusty environment and fire hazard;- increased corrosion due to use in salt and scrap loading (sea climate suitability);- Temberature range from -30oC to 40oC Handling goods: bark, fertilizer, grain, wood chips, wood pellets, HBI, salt, sand, scrap, chippings, steel ingots, peat, sugar beets.3Technical data (generally applicable and applicable to all 5 units) Please also note the specific requirements under VI.3. "Additional Information":1. engine:- Diesel EU Stage V Tier 4 with active regeneration during operation;- Coarse mesh radiator with automatic fan reversal;- Turbo-cyclone air pre-filter;- Automatic idling cut-off;- Ø fuel consumption in litres per hour;- Operation with coloured diesel according to EN 590.2. drive:- All-wheel drive with automatic differential lock;- Power shift transmission with 4 forward and 4 reverse gears each;- Gear selection via toggle switch on steering column.3. chassis:- Floating axle support (rear axle oscillates);- Oil cooling of the axles;- Rear wheels with additional ballast (water filling).4. frame:- Electrical and hydraulic system protected in frame;- Counterweight in welded design;- Underbody protection front/rear;- Tow coupling at rear;- Additional load in rear area as required.5. brake system: Design in accordance with EN ISO 3450:2011,6. steering:- articulated steering with approx. 35o steering angle each;- actuation via steering wheel with rotary knob;- individually adjustable steering column.7. hydraulic system:- hydraulic cylinder with pipe breakage protection and end position damping;- additional circuit for hydraulically driven attachments;- actuation via lever control on the right-hand side of the driver's seat;- design of hydraulic hose fittings, if necessary in stainless steel.8. working equipment:- mast with parallel guidance;- central lubrication system with filling pump;- adjustable automatic bucket positioning system;- vibration damping or floating position for load travel.9Cab:- pressurised cabin with fine dust filter and protective ventilation in accordance with TRGS 554;- vibration-damped cab mounting;- ROPS rollover protection in accordance with EN ISO 3471 and FOPS stone guard in accordance with EN ISO 3449;- interior/exterior noise emission in accordance with EN ISO 6396 or EN ISO 6396 and EN ISO 6396. 2000/14/EC;- Tinted front windscreen made of laminated glass with sun visor;- Sliding window left/right;- Windscreen washer system for front and rear window;- Heating, air conditioning system;- Parking heater or heater with 230 Volt connection incl. connection cable;- interior lighting;- 12 Volt socket with USB connection;- radio with USB connection;- 2 pieces brake pedal and 1 piece accelerator pedal;- storage compartments and document holder;- coat hook;- cup holder;- emergency hammer;- 2 pieces interior and 2 pieces electrically adjustable exterior mirrors (heated);- preparation for radio installation;- holder adjustable for 10" tray;- removable rubber floor mat.10Driver's seat:- Air-sprung or vibration damped with headrest and 3-point safety belt;- Seat inclination and depth as well as backrest and longitudinal position individually adjustable;- Lumbar support;- Armrest with integrated control console;- Seat heating.11. electrical system:- 24 Volt operating voltage;- main battery switch.12. Control system:- multifunctional display with status messages, e.g. fill level underrun etc.;- telematics system with data retrieval (operating hours, fuel consumption, load and idling times) and external interface for data retrieval from CAN bus system.13Lighting:- 2 front headlights with high and low beam and integrated indicator with warning indicator function;- 2 additional front headlights (LED);- 12 work lights (LED) in the roof area of the cab (4 at the front, 2 each on the left/right and 4 at the rear);- 2 reversing lights (LED);- combined brake and rear lights with integrated indicator (warning indicator function);- rotating beacon (LED) on the cab roof.14. safety devices:- Exhaust system or exhaust with spark arrester;- Signal horn;- Acoustic reversing warning device;- Front and rear camera according to EN ISO 5006 with 10" display;- Quick coupler with acoustic alarm in unlocked state;- Step and non-slip steps/running surfaces with railing or grab handles;- 1 piece fire extinguisher;- 2 pieces wheel chocks.15. miscellaneous:- bonnet with electric tilting device;- front and rear mudguards with mud flaps;- tools for daily maintenance incl. storage facilities;- internal numbering according to the AG's specifications on the bonnet left/right;- installation of radios provided by the AG.16Attachments:- robust or low-weight design;- overflow protection to prevent damage to the mast;- identical underscrew blades (rotatable);4. commissioning / trial operation: The transport to and from the site, including dismantling and assembly, shall be carried out by the Contractor;commissioning and a one-month trial operation including instruction of the Principal, including any necessary adjustments, shall also be carried out by the Contractor and shall form part of the rental contract; 50 Documentation: For commissioning, the Contractor shall provide the Principal with all the information for the aforementioned devices, including their equipment, on a digital CD.Specifically, these are the following documents:- Declaration of Conformity; maintenance/ servicing instructions including lists of spare parts/parts and circuit diagrams;- operating instructions (additionally twice in paper form); - overview of all wearing parts to be replaced within the scope of the rental period, including their replacement intervals.6Contract basis: Rental start: 1.6.2021; Rental period: 48:- months; - If possible with optional termination of individual devices for the first time after 36 months of operation; - Operating hours: 2000 operating hours per year and per device; - Insurance: The Customer shall take out a fully comprehensive insurance policy based on the currently valid ABMG (General Civil Liability Insurance Act). In addition, the AG shall take out a machine hull insurance;7. full service contents: Within the scope of the full service, the following services are to be provided by the Contractor: labour and travel costs, freight costs, disposal of supplies and consumer goods, provision of lubricants and operating materials, maintenance, inspection and testing incl. material and cleaning as well as timely notification of the Client (at least 50 hours before the due date), preventive maintenance incl. material and cleaning, monitoring of the wear and tear of parts in contact with the ground, including notification of the Client of necessary replacement intervals (the replacement shall be carried out by the Client on separate order), on-call service, response time of max. 4 hours, handling of warranty services, keeping records of work or service reports.8. miscellaneous: Contract The basis is the rental agreement including annex, which will be made available to you in the context of the request for quotation if you participate successfully.

Opportunity closing date

31 July 2020

Value of contract

£1m-5m