Poland - Chemical products

Description

The subject of the contract is sodium hydroxide Lp. Parameter Unit Value1 Planned amount Mg 6502 Chemical formula - NaOH3 Chemical name - Aqueous sodium hydroxide solution4 Sodium hydroxide content % (m/m) 48 - 515 Sodium carbonate content % (m/m) <= 0.56 Sodium chloride content % (m/m) <= 0.17 Iron content as Fe2O3 mg/kg <= 8,28 Sodium sulphate content mg/kg <= 509 Sodium hydroxide content in dry matter % (m/m) >= 9510 Silica content mg/kg <= 3011 Form - liquid12 Colour - colourless13 Smell - odourless14 pH - strongly alkaline15 Melting point oC 1216 Boiling point oC 14217 Density kg/m3 153018 Viscosity at 40 oC mPas 2219 Disposable delivery Mg About 2420 Supplier car - Heavy, Unloading - Supplier's side22 Tank capacity at the Orderer's side m3 4123 Discharge connection - VK80Discharge and unloading to a storage tank at the Orderer's side. Storage tank capacity 41 m3. The cost of transport, unloading and insurance is on the Supplier's side. Deliveries will be made by tankers equipped with vk 80 type unloading connection and necessary unloading utilities. The subject of the contract is a successive supply of calcium hydroxide in the quantity of 2000 Mg.Parameters of substances listed in the table.lp. Parameter Unit Value1 Planned amount Mg 20002 Chemical formula - Ca(OH)23 CaO content + MgO %(m/m) >= 95,04 MgO content %(m/m) <= 0,65 Ca(OH)2 %(m/m) content >= 90,06 CO2 content <= 2.07 SO3 content %(m/m) <= 0.18 Free water content % <=1.89 Bulk density kg/cm3 0.35 - 0.510 Specific surface area (BET) m2/g Approx. 2011 Screen residue 0.09 mm % <= 1.012 Screen residue 0.063 mm % <= 2.513 Screen residue 0.040 mm % <= 5.014 Screen residue 0.010 mm % <= 15,015 Form - powderColour - White or beige16 Disposable delivery Mg 2417 Tank packaging18 Supplier's truck - Heavy, tanker19 Unloading - Supplier's side connection fi75Discharge and unloading to the Customer's storage tank. Storage tank capacity 170 m3. The cost of transport, unloading and insurance is on the Supplier's side. Deliveries will take place in tankers equipped with DN 75 unloading connection and necessary unloading media. During unloading, the Contractor shall be obliged to have appropriate authorizations and to comply with the applicable occupational health and safety regulations. The subject of the order is successive 75 Mg of active steam activated carbon. Substance parameters given in table No. Parameter Unit Value1 Planned quantity Mg 752 Chemical name - active carbon activated by steam3 External appearance - physical state - powder4 Colour - black5 Iodine number mg/g >= 8006 Moisture content %(m/m) <= 57 Molasses number 8508 Bulk density kg/m3 4009 Droplet size D50 μm 1710 Critical ignition temperature oC 27011 Packaging - Buyer's Pallet 1000l.12 Disposable delivery Ps. 1-313 Supplier's truck - Heavy or Delivery truck14 Unloading - Delivery in 1,000 l "Big-bag" metal containers owned by the Ordering Party.loading into "Big-bags", transport and insurance on the Supplier's side The subject of the contract is the successive delivery of 15 % tri-sodium salt in the quantity of 52 Mg. Substance parameters given in table No. Parameter Unit Unit Value1 Planned amount Mg 522 Chemical name - Mixture on the basis: 1,3,5-triazine-2,4,6(1H,3H,5H)-trition, trisodium salt 15 % aqueous solution; 2,4,6-trimercaptotriazine, trisodium salt3 External appearance - physical state - liquid4 Colour - colourless to light yellow5 Active ingredient content %(m/m) >= 15,06 Density at 20oC g/cm3 approx. 1.127 pH - approx. 12.58 Conductivity mS/cm approx. 609 Packing - Pallet Container 1 000 l.10 One-time delivery Mg 4-611 Supplier's truck - Heavy or delivery truck12 Unloading - On the Ordering Party's side The subject of the contract is a successive delivery of 25 % ammonia water in the quantity of 400 Mg. Substance parameters given in table No. Parameter Unit Value1 Planned quantity Mg 4002 Chemical formula - NH4OH,3 Physical state - Liquid,4 Colour - Colourless,5 Odour - characteristic sharp, biting6 Melting point/freezing point oC -57,57 Boiling point oC +37,78 Solubility in water - soluble in any proportion9 pH - 1110 Density kg/m3 880-91011 Log P(w/o) - -1,3812 Tank packaging13 Disposable delivery m3 by 2014 Supplier's truck - Truck, truck15 Unloading - Supplier's side16 Tank capacity at the Orderer's side 2017 Discharge connection ɸ 7518 Gas pendulum ɸ 50Discharge and unloading to the Orderer's storage tank. Storage tank capacity 20 m3. The cost of transport, unloading and insurance is on the Supplier's side. Deliveries will be made in tankers equipped with a fi 75" unloading connection. Road tankers will be equipped with the necessary unloading utilities. On unloading, the Contractor is obliged to have appropriate certificates and to comply with the applicable health and safety regulations. The subject of the order is a successive supply of microbiocide for water treatment in the amount of 2.3 Mg. Substance parameters given in table No. Parameter Unit Value1 Planned amount Mg 4,52 Active ingredient - 2, 2-dibromo-3 nitrilopropionamid3 Percentage of active ingredient % 204 Neutral ingredients - Polyethylene glycol/water5 Colour - Transparent to brown6 Boiling point C 707 Relative density g / ml at 23 o C 1,20-1,308 Vapour pressure mm Hg. Item 25 o C 18.99 Ignition temperature o C ≥ 18210 200 l barrel packaging on a pallet11 Disposable delivery Mg 0.612 Supplier's truck Weight or delivery truck13 Unloading On the Ordering Party's side The subject of the contract is a successive delivery of 15 % sodium hypochlorite in the quantity of 30 Mg. Substance parameters given in table No. Parameter Unit Value1 Planned quantity Mg 302 Chemical formula - NaOCl3 Form - liquid4 Colour - yellow5 Odour - acute, chlorine6 Melting point/freezing point oC -28,97 Boiling point oC decomposition before reaching boiling point8 Oxidizing properties - strong oxidizing properties9 Density at 20 oC kg/m3 120010 Vapour pressure at 20 oC kPa 2,511 Vapour density g/L 3,212 Dynamic viscosity index in 20 oC mPas 6,413 Solubility - in water without limitation14 Disposable delivery Mg 215 Pallet-pack 1 000 l container.16 The subject of the contract is the successive delivery of boiler water pH buffer and residual hardness stabilizer in boiler water - phosphate based preparation in the amount of 4.4 Mg. Substance parameters given in table No. Parameter Unit Value1 Amount Mg 4,42 Type of substance - Liquid, mixture3 Appearance - Liquid4 Colour - Colourless5 Odour - odourless6 Flash point C > 93.37 Congealing temperature C 18 Relative density - 1.099 Dynamic viscosity mps (22 °C) < 410 sodium hydroxide % 2.5 - < 511 pH - 13.5 - 13.812 Packaging - 200 l barrel13 Disposable delivery Mg 0.8-114 Supplier's vehicle - Heavy or delivery15 Unloading - On the Ordering Party's side The subject of the order is a successive delivery of a 1.6 Mg pH corrector for condensate. Substance parameters given in table No. Parameter Unit Value1 Planned amount Mg 1.62 Physical state - Liquid, mixture3 Appearance - Light yellow colour4 Odour - Amino5 Monoethanolamine % 30-<506 Methoxypropylamine % 10-<207 Viscosity at 20oC cst 11.38 pH 10.8 - 11,29 Liquidity temperature oC -3410 Boiling point oC > 9311 Packaging - Barrel 200 l12 Disposable delivery Mg 0.6 -0.813 Supplier's truck - Heavy or delivery truck14 Unloading - On the Ordering Party's side The subject of the contract is the successive delivery of the following substances:1) pH equaliser, deoxidising agent, mixture of neutralising amines MEA, MOPA, DEHA in the amount of 0,5 Mg. Parameters of the substance given in the table in the OEL - Annex 8 to the ToR. 2) Iron chloride 40 % by 20 Mg. Parameters of the substance given in the table in the OEL - Annex No. 8 to the ToR.3) Technical Hydrochloric acid 30 % in the amount of 20 Mg. Substance parameters given in the table in the OPZ- annex no. 8 to the ToR.4) Desoxidant for boiler water - Volatile, organic desoxidant and passivating agent in the amount of 0.6 Mg. Parameters of the substance given in the table in the OEL - appendix no. 8 to the ToR.5) Sodium sulphite Na2SO3 Sodium sulphate in the amount of 0.1 Mg. Substance parameters given in the table in the CVMP - Annex 8 to the ToR. Part 11: Chemicals for the pre-treatment of raw water (treated surface water) in a reverse osmosis process (membrane manufacturer: TORAY TML20D-400).1. AntiscalantThe subject of the contract is the successive supply of an anti-scalant to membrane systems to protect the reverse osmosis membranes from scaling (protects the membrane surfaces against precipitation of all types of deposits encountered). Planned amount of 1.7 Mg. Pallet container with a capacity of 1000 litres or plastic drums of 200 litres each. One-time delivery 1Mg. The subject of the contract is the successive supply of biocide for disinfection to prevent the overgrowth of biological contaminants on the surface of reverse osmosis membranes. The product is to be based on a mixture of: 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) - 1 % - 3 % (isothiazolones). Planned amount of 1Mg. Pallet container with a capacity of 1 000 L. One-time delivery 1 Mg. The subject of the contract is the successive delivery of a pH corrector in order to determine the target pH in the treated water. The product is to be based on food grade hydrochloric acid at a concentration of 30 % (± 3 %). Planned amount of 8.1 Mg. Pallet container, 1 000 L capacity. Disposable delivery of two pallet containers of 1 000 L each. Unloading on the orderer's side4. DECHLORATIONThe subject of the contract is a successive supply of a disinfectant to eliminate free active chlorine in treated water. The product is to be based on acid sodium sulphite 38-40 %. Planned amount of 2.2 Mg. 200-litre plastic drum packaging. Delivery of 2-3 barrels of 200 L each. Unloading on the orderer's side. Note to part 11. The Contractor is obliged to provide a technical data sheet containing, among others, information on product dosing and to provide technical support related to the application of a given product.

Opportunity closing date

25 February 2019

Value of contract

to be confirmed